蓝色瓷片电容器20KV 高压高频电容器
发布时间：2022-02-14 10:15:24 点击率：
产品特性Features 低损耗Low dissipation factor of 0.06% at 1 KHZ 高频特性High frequency ≥100KHZ 高压特性好High voltage ≥2Un（额定电压） 绝缘电阻大High insulation resistance ≥1000000MΩ 用途Applications 高压电源High voltage power supplies; 激光脉冲gas lasers, high voltage pulse generator 智能电网Smart grid 陶瓷温度特性Ceramic dielectric properties:
外观尺寸Dimension & Lead Style:
订购产品说明Ordering Information
规格型号释义Explanationt of part numbers:
注意事项 PRECAUTIONS （1） 运输和储存 •请避免在高温或高湿度或淋雨状态下运输或储存电容。 •不要放置在有毒气体，如硫酸，盐酸，硝酸等。 •避免碰撞。 （2） 在操作过程中 •避免接触，如汗液电解质。不要赤手触摸。 •小心轻放,避免坠地。 •请勿焊接螺柱端子。 •不要再接终端。 （3） 用法 •当电容器用于高速脉冲，如激光，确保外加电压（峰 - 峰值电压）在电容器的额定规格内。 •确保电容器不暴露使用,请在变压器油或环氧树脂中密封。 (1) During transportation and storage • Do not transport or store where the capacitor will be exposed to hightemperature or high humidity. • Do not expose to poisonous gases such as H2SO4, HCL or HNO3. • Avoid excessive impact such as that caused by falling. (2) During operation • Avoid contact with electrolytes such as perspiration. Do not touch with barehands. • Avoid excessive impact such as that caused by falling. • Do not apply solder to stud terminals. • Do not re-machine the terminals. (3) Usage • When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications. •Make sure that the capacitor is not exposed to radiant heat from chambers or transformers.
外观尺寸Dimension & Lead Style:订购产品说明Ordering Information
规格型号释义Explanationt of part numbers: 注意事项 PRECAUTIONS （1） 运输和储存 •请避免在高温或高湿度或淋雨状态下运输或储存电容。 •不要放置在有毒气体，如硫酸，盐酸，硝酸等。 •避免碰撞。 （2） 在操作过程中 •避免接触，如汗液电解质。不要赤手触摸。 •小心轻放,避免坠地。 •请勿焊接螺柱端子。 •不要再接终端。 （3） 用法 •当电容器用于高速脉冲，如激光，确保外加电压（峰 - 峰值电压）在电容器的额定规格内。 •确保电容器不暴露使用,请在变压器油或环氧树脂中密封。 (1) During transportation and storage • Do not transport or store where the capacitor will be exposed to hightemperature or high humidity. • Do not expose to poisonous gases such as H2SO4, HCL or HNO3. • Avoid excessive impact such as that caused by falling. (2) During operation • Avoid contact with electrolytes such as perspiration. Do not touch with barehands. • Avoid excessive impact such as that caused by falling. • Do not apply solder to stud terminals. • Do not re-machine the terminals. (3) Usage • When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications. •Make sure that the capacitor is not exposed to radiant heat from chambers or transformers.