SL材质高压瓷片电容
发布时间：2019-08-08 11:57:16 点击率：
产品特性Features
低损耗Low dissipation factor of 0.06% at 1 KHZ
高频特性High frequency ≥100KHZ
高压特性好High voltage ≥2Un（额定电压）
绝缘电阻大High insulation resistance ≥1000000MΩ
用途Applications
高压电源High voltage power supplies;
激光脉冲gas lasers, high voltage pulse generator
智能电网Smart grid
陶瓷温度特性Ceramic dielectric properties:
外观尺寸Dimension & Lead Style:
订购产品说明Ordering Information
规格型号释义Explanationt of part numbers:
注意事项 PRECAUTIONS
（1） 运输和储存
•请避免在高温或高湿度或淋雨状态下运输或储存电容。
•不要放置在有毒气体，如硫酸，盐酸，硝酸等。
•避免碰撞。
（2） 在操作过程中
•避免接触，如汗液电解质。不要赤手触摸。
•小心轻放,避免坠地。
•请勿焊接螺柱端子。
•不要再接终端。
（3） 用法
•当电容器用于高速脉冲，如激光，确保外加
电压（峰 - 峰值电压）在电容器的额定规格内。
•确保电容器不暴露使用,请在变压器油或环氧树脂中密封。
(1) During transportation and storage
• Do not transport or store where the capacitor will be exposed to hightemperature or high humidity.
• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.
• Avoid excessive impact such as that caused by falling.
(2) During operation
• Avoid contact with electrolytes such as perspiration. Do not touch with barehands.
• Avoid excessive impact such as that caused by falling.
• Do not apply solder to stud terminals.
• Do not re-machine the terminals.
(3) Usage
• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.
•Make sure that the capacitor is not exposed to radiant heat from chambers or transformers.
低损耗Low dissipation factor of 0.06% at 1 KHZ
高频特性High frequency ≥100KHZ
高压特性好High voltage ≥2Un（额定电压）
绝缘电阻大High insulation resistance ≥1000000MΩ
用途Applications
高压电源High voltage power supplies;
激光脉冲gas lasers, high voltage pulse generator
智能电网Smart grid
陶瓷温度特性Ceramic dielectric properties:
外观尺寸Dimension & Lead Style:
订购产品说明Ordering Information
规格型号释义Explanationt of part numbers:
注意事项 PRECAUTIONS
（1） 运输和储存
•请避免在高温或高湿度或淋雨状态下运输或储存电容。
•不要放置在有毒气体，如硫酸，盐酸，硝酸等。
•避免碰撞。
（2） 在操作过程中
•避免接触，如汗液电解质。不要赤手触摸。
•小心轻放,避免坠地。
•请勿焊接螺柱端子。
•不要再接终端。
（3） 用法
•当电容器用于高速脉冲，如激光，确保外加
电压（峰 - 峰值电压）在电容器的额定规格内。
•确保电容器不暴露使用,请在变压器油或环氧树脂中密封。
(1) During transportation and storage
• Do not transport or store where the capacitor will be exposed to hightemperature or high humidity.
• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.
• Avoid excessive impact such as that caused by falling.
(2) During operation
• Avoid contact with electrolytes such as perspiration. Do not touch with barehands.
• Avoid excessive impact such as that caused by falling.
• Do not apply solder to stud terminals.
• Do not re-machine the terminals.
(3) Usage
• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.
•Make sure that the capacitor is not exposed to radiant heat from chambers or transformers.
上一个：NP0材质高压瓷片电容
下一个：UJ材质高压瓷片电容
返 回