Y5T材质瓷片电容
发布时间:2019-08-06 17:09:13 点击率:
产品特性Features
低损耗Low dissipation factor of 1% at 1 KHZ
高频特性High frequency ≥100KHZ
过大电流High current ≥15mA
高压特性好High voltage ≥2Un(额定电压)
绝缘电阻大High insulation resistance ≥100000MΩ
使用寿命长Long life ≥10 years
用途Applications
适用于高频高压电源High frequency & high voltage power supplies;
激光CO2 lasers, high voltage pulse generator
X光机电源X-ray equipment
无损探伤检测NDT (Non-destructive testing)
机场安检设备Airport security equipment
负离子产品negative ion products / anion products
陶瓷温度特性Ceramic dielectric properties:

外观尺寸Dimension & Lead Style:


订购产品说明Ordering Information

规格型号释义Explanationt of part numbers:

关于Y5T(About Y5T ceramic)
Y5T材质是一种性能较好的II类通用陶瓷,当温度在-25°C到+85°C时其容量变化为+22/-33%,介质损耗小于1%,绝缘电阻大于100000MΩ。
Y5T is a better performance of Class II General Ceramics.Its temperature variation of capacitance is within +22/-33% from -25°C to +85°C. Dissipation factor is less than 1%, insulation resistance greater than 100000MΩ.

选型表

注意事项 PRECAUTIONS
(1)运输和储存:
•请避免在高温或高湿度或淋雨状态下运输或储存电容。
•不要放置在有毒气体,如硫酸,盐酸,硝酸等。
•避免碰。
(2)在操作过程中:
•避免接触,如汗液电解质。不要赤手触摸。
•避免过多的影响,如坠落造成。
•请勿焊接螺柱端子。
•不要再机终端。
(3)用法:
•当电容器用于高速脉冲,如激光,确保外加电压(峰 - 峰值电压),电容器的额定规格内。
•确保电容不暴露辐射室或变压器。 (1) During transportation and storage
• Do not transport or store where the capacitor will be exposed to high temperature or high humidity.
• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.
• Avoid excessive impact such as that caused by falling.
(2) During operation
• Avoid contact with electrolytes such as perspiration. Do not touch with bare hands.
• Avoid excessive impact such as that caused by falling.
• Do not apply solder to stud terminals.
• Do not re-machine the terminals.
(3) Usage
• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.
• Make sure that the capacitor is not exposed to radiant heat from cham
上一个:(选型表2021) 高压瓷片电容
下一个:Y5U材质高压瓷片电容
返 回